Skip to content
Gulfport Fence Serving Gulfport & nearby (228) 555-0100

Fence Gates in Gulfport, MS

Nothing on a fence moves as often as the gate, and that's why it wears out first. Across Gulfport we hang new gates of every size, from a 4-foot pass-through to a double opening that clears a boat on its trailer, in wood, chain link, vinyl, aluminum and steel, and we fix the ones that have quit working.

Most gates that drag or won't latch can be fixed. The usual culprits are a leaning hinge post, a rusted hinge or a frame that has twisted out of square.

Free gates quote

Takes about 30 seconds. Prefer to talk? (228) 555-0100

No obligation. See our privacy policy.

Gates on the Coast: salt, wet ground and boats

Hinges and latches are where salt air shows up first. A plain steel hinge that swung smoothly in spring can bind by fall. Stainless or heavy galvanized hardware and an outdoor-rated self-closing hinge keep a gate working, and a little lubricant a couple of times a year helps.

If you keep a boat, a trailer or a work truck in the backyard, gate width matters. A single wood leaf much past 4 feet tends to droop, and soft ground lets the hinge post lean. For wide openings, two leaves held by a drop rod, or one leaf on a welded steel frame and a deeper footing, stay square far longer.

Double wood drive gate on a steel frame in a privacy fence beside a driveway, a moss-draped live oak nearby

Gate types

Walk gates

A 36- to 48-inch opening built from the same material as the fence, with spring hinges for pets and pools.

Double drive gates

A pair of leaves and a drop rod spanning roughly 8 to 12 feet, enough for a boat, mower or trailer.

Steel-frame wood gates

Pickets matching your fence mounted on a welded metal frame that resists drooping.

Aluminum and steel driveway gates

Swing or slide gates for the front of the property, ready for an opener.

What affects gate pricing in Gulfport

Fence Gates questions

Why does my gate keep sagging?

Usually the hinge post is leaning or the frame has racked. A deeper footing, a steel hinge post or a cross brace that runs up from the low hinge side to the high latch side fixes most of them. Replacing the whole fence is rarely needed.

What gate opening do I need to back a boat trailer through?

Take the trailer's widest measurement across the fenders and allow 2 feet or more beyond it. That usually works out to 10 or 12 feet of clear opening and a double gate. Leave room to swing the truck in the driveway as well.

More fence services

Areas we serve

Fence Gates in Gulfport: get your free quote

Got a gate scraping the driveway, or need room to get the boat out? Phone or use the form and we'll come see your Gulfport gate in person.

Call (228) 555-0100 Free Quote